Rear Drop Pivot is a Horst link style suspension system.
The four bar link design allows for fine tuning on both
wheel travel path and shock rate.
Triple Butted Tube
Triple butted tubes are the hallmark of a high end
aluminum frame construction, and allow for maximum
stiffness at a minimum weight. A triple butted tube has
three different thicknesses along the tube length,
allowing you to focus material where you need it and
remove it where you don't.
Tappered Head Tube
Tapered 1.5" lower to 1-1/8" upper; 1-1/4" to 1-1/8" is
also available. Tapered head tube designs are stiffer and
stronger than conventional straight head tubes, with the
added benefit of offering a greater surface area for
welding. Minimal flex at the front of the frame provides
increased steering precision and accuracy.
Direct Mount Front Derailleur
Direct mount front derailleurs provide for increase front
derailleur stiffness and perfect alignment Direct mount
derailleurs eliminate the clamping system, toeliminate
weight, and work with press fit bottom brackets.
Post Mount DIsc Brake
Direct mounting your rear brake provides additional
torsional stiffness and eliminates adaptors, bolts and
excess weight.
BB92
Along with BB86, this Shimano BB92 Bottom Bracket is
part of the new press fit standard. Typical mountain bike
has a 68 or 73mm bottom bracket shell width, a BB92
equipped bike has a shell that measures 91.5mm wide
and has a 41mm inside diameter.
GEOMETRY
DESCRIPTION
• RDP 5.0A 275+ offer four bar suspension, hydroformed tubes, and smooth welding, all in one superb package.
• Also featuring tapered head tube 1 ⅛'' to 1 ½'', Shimano BB92 120mm travel, and light weight 135mm QR system.